User Manual – Mighty

User Manual

1. INTRODUCTION

This document explains basic user instructions to use the Mighty device.

1.1 GETTING STARTED

Procedure:

  • Using the charging cable provided, plug the headset-end of the cable into your Mighty’s headphone jack and plug the USB end into your computer or any USB wall charger
  • Charge the device for at least 60 minutes
  • While charging, the LED on the device will blink green
  • Once fully charged, the LED on the device will be a solid green
  • Download the Mighty mobile app on your phone (at Apple App Store or Google Play)
  • Launch the Mighty mobile app
  • Follow the setup instructions found in the Mighty mobile app

1.2 TURNING ON THE DEVICE

Procedure:

  • If the unit is off, press the center “Play/Pause” button for 3 seconds to turn on the device
  • The LED on the device will blink purple/pink twice followed by green indicating the device is on
  • NOTE: If the unit is already on, …..

  • 1.3 USING THE DEVICE

  • Procedure:

    • Press the center “Play/Pause” button to start playing music. Press it again to pause music
    • Press the “Left Arrow” button to restart the song. Press it twice to go back to the previous song
    • Press the “Right Arrow” button to play the next song
    • Press the “Plus” button to increase volume
    • Press the “Minus” button to decrease volume
    • Press the “Three dots” button on the top right corner to select the next playlist (a voiceover will state the name of the playlist you have selected)
    • While the device is on, the LED on the device will show a blue flash when pressing any of the above buttons. IS THIS TRUE?

    1.4 TURNING OFF THE DEVICE

    Procedure:

    • Press and hold the center “Play/Pause” button for 6 seconds to turn off the device
    • The LED on the device will blink green twice followed by red indicating the device is off
    • The device may take up to 12 seconds to fully shut down depending on your usage. What does “Fully” shut down mean?

    1.5 CHARGING THE DEVICE

    Procedure:

    • Using the charging cable provided, plug the headset-end of the cable into your Mighty’s headphone jack and plug the USB end into your computer or any USB wall charger
    • While charging, the LED on the device will blink green
    • Once fully charged, the LED on the device will show a solid green

    1.6 CONNECTING TO THE MOBILE APP

    Procedure:

    • Once the unit is charged, follow the instructions on the Mighty mobile app to connect your phone to the device. It will walk you through the Bluetooth wireless connection setup.
    • Note: You must pause your music in order to connect to the mobile app

    1.7 SYNCING THE DEVICE

    Procedure:

    • Use the Mighty mobile app to sync music to your device
    • Note: It is not possible to play music while syncing is in progress

    1.8 LISTENING TO YOUR MUSIC

    Procedure:

    • Wired: Simply plug in your headphones into Mighty’s headphone jack to listen to music
    • Wireless: Connect your Bluetooth headphones or speaker/accessory to Mighty using the Mighty mobile app. You must remove your wired headphones in order to listen to your music via Bluetooth
    • (Note: not all Bluetooth accessories may be supported).

    1.9 Wifi Connection:

    Procedure:

    • During wifi connection, please connect your Mighty device to a 2.4Ghz network. Mighty does not currently support 5GHz networks
    NEED MORE HELP?



      1. Regulatory Information:


    TBD

    Keep in Touch